Tahoe | Yukon

Service your 2014-2018 Chevy Silverado or GMC Sierra 1500 equipped with a BDS 4 or 6-inch lift kit. BDS tie rod ends utilize powdered-metal gusher bearing design enables reduced friction and enhanced strength and stability. Their metal stud with full-ball configuration provides 360 degrees...

Designed to improve stance, performance, and capability, the BDS 4.5-inch lift kit for the 2001-2010 Chevy Silverado and GMC Sierra 2500 HD 4WD is a must have upgrade. For maximum ground clearance.  This kit includes everything necessary to set your truck up right with...

Upgrade your vehicle with BDS NX2 Nitro Series Steering Stabilizer shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied...

When it comes time to replace the upper ball joints in your BDS upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, snap ring, and dust cap gasket (where applicable)...

Increase wheel travel by upgrading the cast steel OE upper control arms (UCA) on your 2007-2016 Chevy Silverado or GMC Sierra 1500 to BDS performance. Specially designed for leveled and lifted applications, these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing...

Designed to improve stance, performance, and capability, the BDS 6-inch lift kit for the 2001-2010 Chevy Silverado and GMC Sierra 2500 HD 4WD is a must have upgrade. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars...

Refresh the handling of your 2014-2018 Chevy Silverado or GMC Sierra 1500 4WD with a pair of BDS Gas Struts for a BDS 4-inch lift kit. Our struts also filter out harshness, noise and vibration. Tuned specifically to each vehicle, rod-displaced valving adjusts to...

Service your 2014-2018 Chevy Silverado or GMC Sierra 1500 equipped with a BDS 8-inch lift kit. BDS tie rod ends utilize powdered-metal gusher bearing design enables reduced friction and enhanced strength and stability. Their metal stud with full-ball configuration provides 360 degrees of smooth,...

Upgrade your 1988-1998 Chevy or GMC 1500 truck or 1992-1998 SUV 4WD with BDS NX2 Nitro Series front shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain...

Improve safety and style by upgrading the front brake lines on your 2007-2018 Chevy Silverado or GMC Sierra 1500 with a set of BDS front brake lines. Specially designed for vehicles with a 6-inch lift, these front brake lines are built with stainless steel...

Increase wheel travel by upgrading the aluminum or stamped steel OE upper control arms (UCA) on your 2016-2018 Chevy Silverado or GMC Sierra 1500 to BDS performance. Specially designed for leveled and lifted applications, these arms are built from high-strength 1.5-inch OD x .120-wall...

Level the front of your 2007-2013 Chevy Silverado and GMC Sierra 1500 truck by installing this 2-inch leveling kit from BDS. Specially designed for the 07-13 GM truck, this 2" leveling kit is engineered for additional tire clearance and improved performance without overextending the...

Improve safety and style by upgrading the brake lines on your 1988-1998 Chevy/GMC 1500 Truck or SUV with a set of BDS front brake lines. Specially designed for vehicles with a 6-inch lift, these front brake lines are built with stainless steel braided hose...

Improve the handling of a lifted 1999-2006 Chevy/GMC 1500 truck or SUV equipped with a factory front sway bar. Designed to be used with a 4- to 6-inch lift kit, the BDS front sway bar link kit will improve handling and prevent body roll....

Upgrade your vehicle with BDS NX2 Nitro Series Steering Stabilizer shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied...

Designed to improve stance, performance, and capability, the BDS 6-inch lift kit for the 2000-2006 Chevy Avalanche, Suburban, or Tahoe and GMC Yukon 1500 4WD is a must have upgrade. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the...

BDS raises the bar with the 2001-2010 Chevy Silverado and GMC Sierra 2500 HD truck with a 4.5-inch suspension lift kit with FOX 2.5 Coil-Over conversion. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right...

When it comes time to replace the upper ball joints in your BDS upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, snap ring, and dust cap gasket (where applicable)...

Designed to improve stance, performance, and capability, the BDS 4-inch lift kit for the 2000-2006 Chevy Avalanche, Suburban, or Tahoe and GMC Yukon 1500 4WD is a must have upgrade. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the...

Upgrade your vehicle with BDS NX2 Nitro Series front shocks for high-end performance at an affordable price. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks...